The Optimum Power Supply for the
Buffalo Electronics IR Extender System
Our IR extender system components are optimized for 12VDC operation
The Buffalo Electronics SPS-1210 high-efficiency power supply is designed to perfectly match and optimize the performance of our IR extender systems.
Buffalo Electronics IR extender system power requirements: 11-13VDC measured at IR-100 terminal block connector (12VDC optimum); 300-1,000mA depending on system size (500mA small, 1,000mA large recommended); 5.5mm x 2.1mm x 10mm plug (center V+, barrel V-)